Abnormal ink output/no ink output/garbled code

1. no ink at all
2. Check whether the OVER light on the boarding card is on or not. If it is on, unplug the sprinkler line and start to check, see if the card itself is protected, check the head data cable and print head.
3. Sprinkler head encryption or abnormal. c. Abnormal power supply

1. There is no ink on a certain channel

. Sprinkler wire arrangement problem, bad contact, re-insert, or replace the wire arrangement. b. Broken nozzle channel.

1. garbled codes appear
2. If the wiring contact is not good, re-insert the wiring or replace it.
3. maintop software anomaly, curve drive anomaly, reload curve drive, or reload maintop software.
4. If the material is abnormal, change the material.
5. curve drive error, use the correct curve drive print.
6. abnormal parameter setting, restore factory setting.
7. Abnormal board card. g. the boarding card is broken.

Startup exception

1. the car doesn’t move
2. Check the motor power supply. b. Check the motor signal wires.
3. Check the 26P FFC cable. d. check the motor.
4. Check the boarding card.

1. the car moves but the movement is abnormal
2. The wrong type of motor.
3. Abnormal power supply, unstable voltage during commutation.
4. 26P poor or abnormal line contact. d. Decoder loses raster points.
5. raster bar exception.
6. Improper contact or abnormal operation of the origin sensor.
7. Bad contact of the motor signal line or wrong signal line.
8. Wrong dialing direction of the motor.
9. Abnormal correlation of lifting ink station, or the wrong setting of ink station type
10. Abnormal parts related to machine movement k. check the boarding card.

Screen error

1. The car has high resistance. bad grating decoder, improper grating decoder, and grating position, and grating decoder wire the problem.
2. The signal line of the trolley motor is in bad contact or the sequence is wrong. The power input of the trolley motor is abnormal. the motor is bad.
3. Motor gear slips and belt loosens. d. check whether the car is jammed.
4. The car is not started at the normal detection limit.
5. head error sensor/motor error
6. The limit switch of the ink station is broken.
7. There is something wrong with the signal line of the ink station.
8. The mainboard is broken.

1. Communication error the communication failed

26p long data line damaged

1. Origin sensor error

Origin switch or connection line is broken