As a large-width color inkjet printing device, piezoelectric photo machine must pay attention to anti-static operation in daily printing output work, providing better printing environment for Eco solvent printer.
Static electricity will interfere the normal use of the photographic machine, presumably, this is very clear to everyone, especially in the cold and low-temperature dry winter, the generation of static electricity is very common, at the same time, the machine in the normal inkjet printing work, anti-static work cannot be ignored.
Winter cold and dry at low temperature environment, pictorial machine running at high speed under the condition of easy to produce large amounts of static electricity, because the car frame and guide the friction, combined with related paper medium material in a dry environment also prone to static electricity, especially in the use of plastic base material, such as the medium such as PP, lamination, also can produce a large number of static electricity. Especially when the machine is running at high speed, the generation of static electricity will be promoted. For example, static electricity can interfere with the sprinkler head, resulting in the color chaos of the pictorial machine printing screen, unknown failures such as flying ink, spinning ink and other inkjet printing, which will directly damage the sprinkler head or even the board card, so the work of eliminating static electricity must be done well.
Eliminate static electricity and the anti-static operation of photo machine, can be for the photo machine grounding, photo machine connected to the ground line, for example, Shanghai weir complete series of photo machine is installed grounding line connecting line, can extend the grounding line for the operation. For example, the place of the grounding line on the equipment should be the place of the machine body metal closest to the main board, not too far, or some other special circumstances. Besides, during the connection process, it is better to keep the line within 3-5 meters. Otherwise, it will have a great impact on our actual use. When connected to the underground, it is better to control the depth at 1.5-2m, and some salt water can be sprayed around it.
In addition, photo machine anti-static operation can also adjust the humidity of the working environment of photo machine to avoid indoor environment too dry methods such as processing. There are also some static effects that can be avoided in the process of operation, such as touching the related electronic components with hands, etc. Please pay attention to these, and do not ignore the impact of static electricity on the machine.