Comparison between Epson modified uv printer and self-developed assembly machine

The advantages of the original assembly machine are shown as follows: 1. Free from any material restrictions, it can carry out color photo-level printing on wood, glass, crystal, PVC, acrylic, plastic, stone, leather and other surfaces.

2, whether it is a simple block color pattern, full-color pattern or the pattern with excessive color, can be completed in one printing, no need for plate making, printing, and repeated color.

3. For special effects, 3D embossed three-dimensional patterns can be printed on the surface of the material, and the patterns can be customized by yourself without restriction. Independently develop the boarding card, test and run every step from design to assembly.

Epson modified is usually printed with a single head: this is the traditional Epson and photo machine to retain the heat, remove the frame, and add a platform assembly. Not only is it slow to print, but it doesn’t have embossing, sanding,

Light oil and other special processes. Poor stability, unable to achieve more than three hours of continuous printing, frequent board card error report,

It cannot meet industrial mass production. Short service life, generally 3-5 months have to replace a print head.

After-sales problems: since the modified machine does not participate in the research and development design, it directly applies the complete machine head. If the machine head fails, the modified machine is difficult to make corresponding after-sales maintenance.

The UV flat printer independently developed and produced is more comprehensive in terms of after-sales service.

Each link is involved in the design, with more mature maintenance methods and skills.

Disadvantages include:

1. The printing cost is high, and the cost of ink is twice the price of ordinary water-based ink.2. Relatively slow printing speed, compared with the fast printing of silkscreen and offset printing,

Short printing is slow. Choose the UV printer, more according to their material requirements, each printing equipment is good at the printing field, to choose according to local conditions.

It should be noted that when purchasing equipment, attention should be paid to modify equipment and original equipment.

Refitted to a4, a3, a2 and a1, refitted to 9880, 7880, 4880 and 1900, unstable, unable to work for a long time.