Due to the high penetration rate of Epson R210 and R230 in the market, the light flash fault treatment method is first introduced below. Since Epson R210 and R230 have a perfect inspection system, the common faults are often shown as light flash tips. The common faults are summarized to help achieve the purpose of quick troubleshooting.
Fault phenomenon: EPSON R210, R230 ink lamp. Power lamp flashes. The ink lamp is always on. Power lamp flashes. This is a reminder that the ink has run out or that the cartridge is not recognized.
Solution: ink cartridge cannot be detected. Press the ink change button! Change the ink cartridge, the specific can be in the printer driver properties of the specific prompt, according to the prompt operation can be.
Fault: EPSON R210, R230 feed and ink lamp flicker at the same time
Solution: the paper sensor under the head of the printer, if changed for a continuous supply, check whether the length of the pipeline is appropriate, adjust the length of the pipeline, so that the word car to the left and right when the length of the pipeline is appropriate, the problem can be solved.
Fault phenomenon: EPSON R210, R230 feed light, and ink light alternately flash
Solution: scrap ink tank full, please use zero software zero
Malfunction: EPSON R210, R230 ink lamp, and feed lamp flash. But ink lamps flash faster than paper lamps
Solution: check that the CD tray is closed
Malfunction: after starting up the EPSON R210 and R230 printers, the ink cart went several times but stopped without returning to the starting position, and then the paper light and the ink light flashed simultaneously.
Solution: if there is no continuous ink supply solution: drop a few drops of lubricating oil to the steel shaft of the scooter if there is a continuous ink supply: glue the ink tube for continuous ink supply to the inside of the printer to prevent the raster problem caused by this