Winter temperature is low UV flat printer ink thickening external factors.
It is a physical phenomenon that ink thickens under the influence of temperature, but it is the form, not the essence, that changes.
UV flat printer ink is too thick, viscosity is also large, it is best not to use diluent or inking oil to adjust its viscosity. Because when users need to mix ink,
Ink manufacturers produced by the original ink can accommodate the total amount of various additives is limited, beyond the limit, even if you can use, also weakened the basic performance of the ink, affect the quality of printing.
Besides, the viscosity and consistency of ink here refers to its properties rather than the phenomenon. The thickening of ink caused by temperature can be solved by the following methods:
(1) put the original ink on the radiator or next to the heater, and slowly return to the original temperature.
(2) heat plates are installed around the secondary ink cartridge and printhead to keep the ink temperature at normal temperature
(3) in case of emergency, use boiling water for external heating. The specific method is to pour boiling water into the basin, and then put the original bucket (box) ink in the water.
However, to prevent water vapor immersion, take it out when the water temperature drops to about 26℃, open the cover and stir it evenly, and then use it. It is advisable to keep the temperature of the workshop at about 26℃.