1. Always hold the spray car in place during transportation, so that it can not slide freely.
2. When the machine doesn’t work must let spray car in situ spray flash flash spray (continuous time not more than three hours) or the nozzle moisturizing (nozzle to stop working, the time may not exceed 15 minutes of direct exposure to the air), because the ink of volatile, nozzle on the ink was dry quickly, and plug nozzle.
3. When print found the broken needle, then please do not hurry to clean nozzle, spray car moved to the first wash a look below to see if there is silt ink or fiber material in hanging in the nozzle, identify the cause of good nozzle needle breakage, handling of nozzle accordingly again.
Replace the ink filter regularly. (the period is 3 months)
5. Ensure the machine working environment ventilation, clean, avoid direct sunlight for ink machine system, ink system must be sealed, needs and the atmosphere where it must add an air filter, equipment workplace, as far as possible to reduce dust, ensure that the work site to sweep the floor once a day.
6. When the machine does not work, the car must be moved to the moisturizing position, and use the hydration to moisturize the sprinkler head, and do not expose the sprinkler head to the air.
7. The sprinkler head must be hydrated according to the device’s standard moisturizing device. If there is a problem with the moisturizing device, it should be handled as soon as possible (the period should not exceed two days), and the maintenance can be maintained in a regular manner.