First, you need to standardize operating flatbed printer nozzle this laid hands on him. Although, today’s flatbed printer operation method has simplified a lot, almost entirely for the computer software operation, the method is very simple, but, at the time of operation, still cannot be careless and random. Because it was very big machine, tablet printer internal system is complex, if the operation is not standard operating multiple functions or multiple keys or a short time, which can make flatbed printers cannot cope with fault and cause crashes, etc. These actions make the nozzle in the printing status but have not for printing work, easy to loss of nozzle.
In addition, in the flatbed printer to print before and after work, need to shower and clean, clean, do not use ordinary paper towel or cloth to wipe, otherwise very easy to make the nozzle with dust and fiber, led to the nozzle blockage.
Second, we should pay attention to choice of flat-panel printers auxiliary parts. Flatbed printers, excellent manufacture, not a useless parts installation, therefore, not taken any parts on flatbed printers, frequently check and solid flatbed printer parts installation, don’t let the cable fall off or loose. Especially the ink tank, air filter on the ink tank, these easily mixed with various kinds of particles of dust, will cause ink pollution, can produce the wear of nozzle and nozzle parts.
Parts manufacturer has a earthed in flat printer nozzle and heat sink. Which can effectively eliminate static electricity grounding line, to prevent the nozzle is worn or dust adsorption. When the tablet printer nozzle slightly long work time, please pay attention to the nozzle temperature, and ensure the normal work of the heat sink.
Last but not least, flat ground facilities must ensure the improvement of the printer. Inside the work shop will be caused by particles invisible air friction electrostatic, electrostatic for every system environment of flatbed printers have great harm.